东佳牌FA204K梳棉机主要规格及技术特征：
适用范围：纤维长度22-76MM纯棉化纤及其混纺；
产量（公斤／时）：45（*高）；
棉条定量（米）：3.5-6.5；
工作宽度（毫米）：1000；
总牵伸倍数：68.7-152.8；
刺辊工作直径（毫米）：￠250；
刺辊工作转速（转／分）：823，938，1039；
道夫工作直径（毫米）：￠706；
道夫工作转速（转／分）：4-46；
锡林工作直径（毫米）：￠1289；
锡林工作转速（转／分）：323，360，403；
回转盖板根数（工作盖板／盖板总数）：39／104；
附加梳理部件：刺辊分梳板，前后固定盖板；
适用棉条筒（毫米）：￠600＊900，￠600＊1100；
总装机功率：7.92KW；
主电机：3.3KW；道夫电机：1.5KW；吸风电机：2.2KW；
清洁辊电机：0.37KW；喂入辊电机：0.55KW；
占地面积：（长X宽）：3786＊2032毫米；
机器净重：约5000公斤
选用：清梳联：无回花清梳联，适用高速、高产；
间歇吸：机上连续吸风机排风量2400立方米／小时，机上机下间歇吸排风量3000立方米／小时。
连续吸：连续吸风口排风量2800-3500立方米／小时。

特点：
1、主电机轴上装有节能离合器，用三角带传动锡林，再由锡林传动刺辊，结构简单可靠，启动平稳，设有刺辊速度传感器，使刺辊速度与道夫开关车相联，防止堵车。
2、道夫电机交流变频无级调速、慢速生头、快速运转，操作方便，控制灵活，可靠，传动采用同步带，运转稳定、噪音低。
3、喂入辊单独电机传动，交流变频无级调速与道夫联锁控制。
4、采用三罗拉剥棉装置，剥棉罗拉上方装有积极传动的清洁辊，以防止道夫针布轧伤，轧辊和大压辊之间装有可移动的槽形弧板集棉器，以提高运转稳定性。
5、机左侧设有带风机的滤尘箱，连续吸取机上废花，存于滤尘箱内，然后被机外吸尘系统间歇顺序地吸出利用。滤尘箱内的废花和车肚花分开吸取，既能降低每台风机电量，又可提高纤维的利用率。
6、特制的机器强度高，易调整，便于大漏底拆卸。
7、适应棉卷或棉箱喂入。
8、设前后固定盖板及刺辊分梳板；
9、锡林道夫结构优化设计、加强刚性，提高精度。
10、方便安全的全封闭式罩壳。
11、四处自停。
12、盖板采用0.56mm小踵趾，提高分梳效能。

Main specifications and technical features:Scope of application:((Tbe brand FA204K carding machine of DongJia))
the length of the fiber cotton fiber and its blended22-76MM;Yield ( kg / h ):45( highest);Sliver quantitative (m ):3.5-6.5;Working width ( mm ):1000;Total draft:68.7-152.8;Thorn roller diameter (mm): GSM250;Licker-in speed ( RPM ):8239381039;Astoria working diameter (mm): GSM706;Doffer speed ( RPM ):4-46;Cylinder working diameter (mm): GSM1289;Cylinder rotation speed ( RPM ):323360403;Rotary flat number ( work / cover plate number ):39/ 104;Additional carding element: licker-in carding plate, front and rear stationary flat;Application of sliver cans ( mm ): GSM600*900,600*1100by;Total power:7.92KW;Main motor::1.5KW3.3KW; doffer motor; the suction motor:2.2KW;The cleaning roller motor:0.37KW;0.55KW: feed roll motor;Area: ( length X width ):3786* 2032 mm;Machine net weight: about 5000 kgSelection: blowing-carding : no return flower blowing-carding, suitable for high-speed, high yield;Intermittent suction: machine continuous suction fan exhaust volume of 2400 cubic meters / hour, machine under intermittent suction air volume3000 cubic meters / hour.Continuous suction: continuous suction outlet exhaust air volume 2800-3500cubic meters / hour.Characteristic.In 1, the main motor shaft is provided with energy saving clutch, with a triangle belt transmission cylinder, the cylinder drive taker-in, simple and reliable structure, stable starting, a licker-in speed sensor, the licker-in speed doffer switch is connected with the car, prevent traffic jams.In 2, Duff motor AC frequency conversion stepless speed regulation, slow students head, quick operation, convenient operation, flexible control, reliable, drive by synchronous belt, stable operation, low noise.In 3, the feeding roller separate drive motor, AC frequency conversion stepless speed regulation and doffer interlock control.In 4, the three Luo La cotton stripping device, cotton Luo La are arranged above the active drive of the cleaning roller, to prevent the doffer roll over, and between the pressure roller is provided with a movable groove plate arc cotton collector, in order to improve the operation stability.In 5, left a fan filter box, continuous drawing machine waste flower, stored in the filter box, and then be machine vacuum system sequentially using intermittent suction. Dust filtering box waste flowers and car belly flowers separate lessons, which can reduce the quantity of each fan, and can improve the utilization ratio of fiber.In 6, a special high mechanical strength, easy adjustment, convenient disassembly of big bar grid.In 7, adapted to cotton or cotton feeding box.In 8, a front plate and taker-in carding plate;In 9, the cylinder doffer structure optimization design, strengthening rigidity, improving precision.10, convenient and safe all closed shell.Around11, automatic stop.In 12, the cover plate adopts0.56mm small heel-toe, increase the carding efficiency.